- Daily maintenance and maintenance of wire drawing machine
Source:本站 | Release Date:
2022-07-11 13:16:09
| Views:546
Summary:
First, the operating requirements of the wire drawing machine1. Before using the wire drawing machine for processing, you must first understand and be familiar with the processing drawings and some related technical data, so as to avoid waste or scrap…
First, the operating requirements of the wire drawing machine
1. Before using the wire drawing machine for processing, you must first understand and be familiar with the processing drawings and some related technical data, so as to avoid waste or scrap in the processing process.
2. The wire drawing direction and wire drawing abrasive belt should be correctly determined and selected, and there should be no mistakes.
3. The operator should wear gloves to work, and should provide some necessary protection to the surface of the workpiece.
4. If the surface of the workpiece is not clean, wire drawing is strictly prohibited.
5. The finished product after drawing should be protected and handled with care.
Second, the maintenance and maintenance of the wire drawing machine
1. Daily maintenance
(1) The equipment should be cleaned after each use, and some necessary inspections should be carried out.
(2) Check and adjust the abrasive belt, and perform daily lubrication work on the equipment.
2. Weekly maintenance In addition to daily maintenance, the conveyor belt should also be checked to see if it is properly tensioned.
